Access / Servers / Radius

Configuring a Radius server for user authentication in services like vpn or captive portal is easy just go to System ‣ Access ‣ Servers and click on Add server in the top right corner.

Fill in the form:

Descriptive name radius_test Enter a descriptive name
Type Radius Select Radius
Hostname or IP address Enter the IP of your Radius server
Shared Secret secret Shared secret for your Radius server
Services offered Authentication Select Authentication,for Captive portal + accounting
Authentication port value 1812 Port number, 1812 is default; for accounting it’s 1813
Authentication Timeout 5 Timeout for Radius to respond on requests

Use the tester under System ‣ Access ‣ Tester to test the Radius server.

If you want to use the FreeRADIUS plugin set up the server as and don’t forget to add a Client in the FreeRADIUS configuration.