Setup WPAD / PAC



OPNsense supports generating PAC files to provide automatic proxy configuration files to clients. For example if your web GUI is running at, your PAC URL will be

In Firefox you can configure your proxy using PAC by the following steps manually:

  • Click the menu Icon and open “Settings”
  • Scroll down to “Network Proxy” and click “Settings”
  • Check “Automatic Proxy Configuration Address”
  • Enter the URL of the PAC file like mentioned in the paragraph above into the text field and click “OK”


Your browser may be unable to connect to the internet if the PAC file is not available. This type of configuration is not recommended on mobile devices like laptops if employees can use the devices for home office. For such devices WPAD should be used.

Configuring PAC

First Step: Creating Matches

Go to Services ‣ Proxy ‣ Configuration and open Match


Enter a name for the match and an optional description. Then choose what to match on. In our example we want to achieve that hostnames without a FQDN (like server01) and also our internal domain ( will be excluded from the proxy.

Name A unique name for the match to call it from rules.
Description A short description for your own reference.
Negate Inverts the match (any that does not match)
Match Type Choose what you want to match on

The rest of the fields depend on the used Match Type. For example if we match on “Plain Hostname”, we do not need any additional parameters.

The match “Plain Hostname means no dots inside the domain so if we want to create a fqdn match, we can simply invert this:

Name is_fqdn
Description can stay empty
Negate checked
Match Type Plain Hostname
Name not_internal
Description can stay empty
Negate checked
Match Type Hostname matches
Host Pattern Wildcard for your internal domain

Second Step: Create Proxy Servers

Now switch to PAC ‣ Proxies and add new proxy servers.

Name Enter a name which will be shown at the rules view for selection
Description You can add an optional description for this proxy
Proxy Type Enter a Proxy type or DIRECT if no proxy should be used
URL Enter the Proxy URL unless DIRECT has been choosen

In this case it is assumed that only a single LAN and a DMZ exists and that internal connections should not run over the proxy. To make meaningful rules, we need two possible return values:

  • The LAN Proxy
  • No Proxy

No proxy is quite simple to configure:

Name direct
Description can stay empty
Proxy Type Direct Connection
URL empty

For outgoing connectins we need the proxy:

Name lan_proxy
Description can stay empty
Proxy Type Proxy
URL Proxy IP + ‘:’ + Proxy Port

Third Step: Create Rules

Now as the matches and the proxies exist, rules can be built. For that, switching to PAC ‣ Rules is required.

Now the following rule needs to be created:

Enabled checked
Description a description for your reference
Matches the two previously created matches
Join Type And
Match Type If
Proxies Select the LAN proxy

Click the orange reload button and you are done.


Web Proxy Auto Discovery is used to find the PAC file for the domain.

Using DNS (Unbound)

Variant 1: Automatic Configuration


When you use this option, the wpad hosts and the TXT records for the domain will be overridden. This may break some other records like TXT records for SPF for this particular domain.

In Unbound, you can simply check the following checkbox:


This will define the host records of any domain configured in DHCP as CNAME for your firewall host. It will also override TXT records resolve to the URL to the PAC file.

Variant 2: Manual Configuration


When DNS is used, OPNsense must respond via HTTP on port 80.

Open the page Services ‣ Unbound DNS ‣ Overrides and add a new host override for the wpad host:

Host wpad
Domain your domain
Type A or AAAA
IP IP of your OPNsense (where the Web interface is reachable
Description can stay empty

Save the settings and apply the changes.

Using DHCP

Variant 1: Automatic Configuration

In the DHCP server settings, you can check the following checkbox:


In this case, an entry for the protocol and the port of the web interface will be created with the domain you choose in your system settings (domain of the firewall). The hostname is wpad. If you are running the OPNsense web interface on port 80 with HTTP. The following URL will be created:


If you have HTTP Redirect enabled via System ‣ Settings ‣ Administration, make sure your browser accepts the certificate presented by OPNsense, as it won’t download wpad.dat if the certificate is untrusted.

Variant 2: Manual Configuration

Open the page Services ‣ DHCP ‣ Server, select the correct interface and scroll down to the “Additional Options”.

Add this line and save:

Number 252
Type String
Value PAC file URL enclosed in double quotes

Firefox Configuration

Open Settings Menu

First, the settings menu must be opened. There are two ways. You can either


first click Edit


then click Preferences or you can also


click the menu icon and then click Preferences.

Configure Proxy


Then scroll down to the bottom of the page and click Settings in the Network Proxy settings.


In the newly opened window, you can setup your proxy settings. If you want to force Firefox to use WPAD/PAC, choose Auto-detect proxy settings for this Network. Click save and you are done.